opkblink.blogg.se - Routeros raspberry pi 3

By default, the username is admin and there is no password. Enter the username and password in the login window. The connection address is prefilled (ex: 192.168.88.1).

Using the device where the MikroTik Mobile App is installed, connect to this AP.

The MikroTik Routerboard exposes a WiFi Access Point (AP) with SSID MikroTik-xxxxxx, where xxxxxx are the last 6 digits of the device’s MAC Address (printed on the back panel). If your configuration was successful, your gateway will connect to The Things Stack after a couple of seconds. It will become a D and the device status will update. Press the E to enable the gateway device. In the device settings, click the Network Servers Dropdown to view available servers.

Down port: UDP downstream port of the Gateway Server, typically 1700.įrom the top menu, select the Devices Tab.

Up port: UDP upstream port of the Gateway Server, typically 1700.

Address: Address of your The Things Stack deployment.

Make sure the status is set to Disabled, if needed press the D to disable the LoRa Device.įrom the top menu, select the Servers Tab and press the Add New button. The MikroTik Routerboard exposes a WiFi Access Point (AP) with SSID MikroTik-xxxxxx, where xxxxxx are the last 6 digits of the device’s MAC Address (printed on the sticker of the box, under W01).Ĭonnect to this AP. The EUI of the gateway can be found on the back panel of the gateway under the field GW ID.

A web browser (see section Configuration via Browser), or the MikroTik Mobile App installed on a smartphone (see section Configuration via App).Ĭreate a gateway by following the instructions for Adding Gateways.

MikroTik Routerboard wAP LoRa8 kit connected via ethernet.

User account on The Things Stack with rights to create Gateways.

The image on the right shows the proper connections to the device. The MikroTik Routerboard wAP LoRa8 kit comes with a PoE adapter. This page guides you to connect it to The Things Stack using a web browser or the MikroTik Mobile App for Android/iOS. There are multiple interfaces to configure the gateway parameters. Currently, this gateway does not support changing frequency channels.